LT&L eco-637gs #718 in tricolour paint

After 25 years of being a transfer motor, class F #454 had an electrical room fire and was retired and cut up for parts (the frame + trucks to ILW, the electrical components to Portland, with the bodyshell eventually being sold for scrap)

This is what was made from the frame + trucks. The (USA) EPA was about to start regulating emissions on railroad equipment, and the 251s that ILW specialised in weren’t even slightly capable of meeting even the weakest standards. So they, realizing that their lucrative business of remanufacturing locomotives was at risk of being regulated out of existance, spent a small fortune on various clean(er) prime movers and built up a handful of testbeds to try them out on.

The original configuration, which worked well until one of the prime movers failed, was two 1850HP Caterpillar 3516’s driving a pair of alternators, which were rectified into a DC bus driving six inverters (one per axle) and their associated 3-phase traction motors.

In 2016, after 19 years of service, one of the 3516s failed, so when it went into the TdM shops for repair both of them were ripped out and replaced with a pair of Cummins QSK78s, making 718 into the single most powerful diesel locomotive on the system.

It is currently running (with a pair of slugs to spread the horsepower over more axles) on the ALSO/HC/RLK/OC group of railways in central Ontario.

  • Copyright © 2024 by Jessica L. Parsons (orc@pell.portland.or.us) unless otherwise noted
    Sun Sep 12 15:33:26 PDT 2021